Roger™ GNSS Line Amplifier is used to allow longer cable runs for GNSS Repeaters.
It has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO frequency bands and it includes a filter to remove unwanted signals that may have entered the cable at some point.
Amplifier is powered through the output signal cable by the Roger™ GNSS Repeater and also passes on DC power for the GPS receiving antenna or an another Roger™ GNSS equipment.
₹57,375.00
Roger™ GNSS Line Amplifier is used to allow longer cable runs for GNSS Repeaters. It has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO frequency bands and it includes a filter to remove unwanted signals that may have entered the cable at some point.
Technical information:
- Size: 220*148*39mm
- Weight: 135 g
- Operating Temperature: -40 – +75°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: +16dB
Download Datasheet
Related products
-
₹134,990.00
GNSS-L1G1GA, GNSS repeater
ROGER GALILEO/GPS/GLONASS repeater operates by receiving satellite signals with an antenna located outside the building and re-radiating the signals to the indoor area or covered space.
Use of re-radiated signals indoors means that GALILEO/GPS/GLONASS receiver is tracking the current status and signal from the satellites.Basic Package includes:
- GNSS-L1G1GA Repeater,
- Antenna, Antenna mount
- 20 Meter cable
- Power Supply
Product code :GNSS-L1G1GA-BP-EU/UK/US
Download datasheet
-
₹60,615.00
The ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs.
Technical information:
- Size: 110*143*28mm
- Weight: 135 g
- Operating Temperature: -25 – +55°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: +16dB
Download Datasheet
-
₹97,875.00
ROGER™ GNSS Amplifier & Splitter is a combined signal splitter and line amplifier that can transmit amplified signal to up to three separate repeater units
Technical information:
- Size: 110*143*28mm
- Weight: 195 g
- Operating Temperature: -25 – +55°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: +16dB
Download Datasheet