With the ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs. DC power is passed from the chaining output to the input connector for line amplifier and GNSS receiving antenna.
ROGER™ GNSS Splitter is a one to five signal splitter with an output of -4 dB (1 port) and -12 dB (4 ports) that can transmit signal to up to five separate GNSS repeater units. The splitter is easy to use and permits a wide range of system configurations.
₹60,615.00
The ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs.
Technical information:
- Size: 110*143*28mm
- Weight: 135 g
- Operating Temperature: -25 – +55°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: +16dB
Download Datasheet
Related products
-
₹54,675.00
The ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and two repeater outputs.
Technical information:
- Size: 110*143*28mm
- Weight: 185 g
- Operating Temperature: -25 – +55°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: 2 x -4 dB
Product Code: GNSS- S2
Download Datasheet
-
₹299,375.00
ROGER™ GNSS Amplifier & Splitter is a combined signal splitter and line amplifier that can transmit amplified signal to up to three separate repeater units. Amplifier has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO frequency bands and it includes a filter to remove unwanted signals that may have entered the cable at some point.
Basic Package includes:
- GPS L1 Repeater,
- GPS Splitter
- GPS Amplifier,
Product code :GPSR-SAP-EU/UK/US
-
₹79,230.00
A single ROGER GPS Repeater Package is enough to provide a GPS indoor coverage area of about 1000 square meters and a distance up to 50 meters from the repeater center. Mount the external antenna on the roof of the building and connect the cable supplied with the kit to the antenna and other end to the repeater installed indoors.
GPS Repeater Basic Package includes:
- GPS-1 Repeater,
- Antenna, Antenna mount
- AC Power Supply
- Manual
Product code : GPSR-1-EU/UK/US
Download datasheet