Menu Close

GNSS-S Splitter, IP67

₹73,575.00

With the ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs.

Categories: ,

With the ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs. DC power is passed from the chaining output to the input connector for line amplifier and GNSS receiving antenna.
ROGER™ GNSS Splitter is a one to five signal splitter with an output of -4 dB (1 port) and -12 dB (4 ports) that can transmit signal to up to five separate GNSS repeater units. The splitter is easy to use and permits a wide range of system configurations.

Related products

  • GPS Repeater unit- AC Power, IP51

    ₹79,230.00

    A single ROGER GPS Repeater Package is enough to provide a GPS indoor coverage area of about 1000 square meters and a distance up to 50 meters from the repeater center. Mount the external antenna on the roof of the building and connect the cable supplied with the kit to the antenna and other end to the repeater installed indoors.

    GPS Repeater Basic Package includes:

    • GPS-1 Repeater,
    • Antenna, Antenna mount
    • AC Power Supply
    • Manual

    Product code : GPSR-1-EU/UK/US

    Download datasheet
    Add to cart

  • GPS, GNSS- A Amplifer, IP51

    ₹57,375.00

    Roger™ GNSS Line Amplifier is used to allow longer cable runs for GNSS Repeaters. It has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO frequency bands and it includes a filter to remove unwanted signals that may have entered the cable at some point.

    Technical information:

    • Size: 220*148*39mm
    • Weight: 135 g
    • Operating Temperature: -40 – +75°C
    • Connectors: TNC female input TNC female output
    • Frequency range: 1200-1700 MHz
    • Noise figure: <5 dB
    • Impedance: 50Ω
    • Gain: +16dB

    Download Datasheet

    Add to cart

  • GPS, GNSS Splitter- S2, IP51

    ₹54,675.00

    The ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and two repeater outputs.

    Technical information:

    • Size: 110*143*28mm
    • Weight: 185 g
    • Operating Temperature: -25 – +55°C
    • Connectors: TNC female input TNC female output
    • Frequency range: 1200-1700 MHz
    • Noise figure: <5 dB
    • Impedance: 50Ω
    • Gain: 2 x -4 dB

    Product Code: GNSS- S2

    Download Datasheet

    Add to cart