GNSS-S, Splitter
With the ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to
several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO/BEIDOU frequency bands. Splitter
is one to five splitter. DC power (+5V, max 100mA) is passed from -4 dB port to antenna port which is
connected to the GNSS receiving outdoor antenna.
ROGER™ GNSS Splitter is a one to five signal splitter with an output of -4 dB (1 port) and -12 dB (4 ports) that can transmit signal to up to five separate GNSS repeater units. The splitter is easy to use and permits a wide range of system configurations.
Datasheet
ROGER™ GNSS Splitter is a one to five signal splitter with an output of -4 dB (1 port) and -12 dB (4 ports) that can transmit signal to up to five separate GNSS repeater units. The splitter is easy to use and permits a wide range of system configurations.
Datasheet
Technical information
- Size: 110*143*28 mm
- Weight: 135 g
- Operating Temperature: -25 - +55°C
- Connectors: TNC female input TNC female output
- Frequency range: 1100-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Attenuation: 1 x -4dB and 4 x -12dB
- Power supply: The splitter is powered through the RF input connector from the ROGER GNSS Repeater