GNSS-AS, Line Amplifier/Splitter
ROGER™ GNSS Amplifier & Splitter is a combined signal splitter and line amplifier that can
transmit amplified signal to up to three separate repeater units. Amplifier has a gain of +16dB at the
GPS L1/L2/GLONASS/GALILEO/BEIDOU frequency bands and it includes a filter to remove unwanted signals
that may have entered the cable at some point.
Splitter is a one to three signal splitter that can transmit signal to up to three separate GNSS (Global Navigation Satellite System) repeater units.
Amplifier is powered through the output signal cable by the ROGER™ GNSS Repeater and it passes DC power forward to ROGER™ GNSS Splitter, another GNSS line amplifier or GNSS receiving antenna.
The splitter & amplifier is easy to use and permits a wide range of system configurations.
Datasheet
Splitter is a one to three signal splitter that can transmit signal to up to three separate GNSS (Global Navigation Satellite System) repeater units.
Amplifier is powered through the output signal cable by the ROGER™ GNSS Repeater and it passes DC power forward to ROGER™ GNSS Splitter, another GNSS line amplifier or GNSS receiving antenna.
The splitter & amplifier is easy to use and permits a wide range of system configurations.
Datasheet
Technical information
- Size: 110*143*28mm
- Weight: 195g
- Operating Temperature: -25 - +55°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Size: <5 dB
- Impedance: 50Ω
- Amplifier section Gain: +16dB
- Splitter section Gain: N/A
- Connector amount: TNC female input, 3xTNC female output
- Power supply: The amplifier&splitter is powered through the RF input connector from the ROGER GNSS Repeater
- Gain/Attenuation: 1 x +12 dB with amplifier section / 1 x -4dB without amplifier section with DC input from repeater. And 2 x +4 dB with amplifier section / 2 x -12dB without amplifier section. DC blocked for repeaters.