GNSS-L1L2G1GA-67, GNSS repeater
ROGER GNSS repeater operates by receiving GPS/GLONASS/GALILEO/BEIDOU satellite signals with an antenna
located outside the building and re-radiating the signals to the indoor area or covered space.
Use of re-radiated signals indoors means that GPS/GLONASS/GALILEO/BEIDOU receiver is tracking the current status and signal from the satellites.
When a GPS/GLONASS/GALILEO/BEIDOU receiver is moved from covered area to outdoors and vice versa, the receiver is instantly tracking the location instead of time consuming acquisition.
Datasheet
Use of re-radiated signals indoors means that GPS/GLONASS/GALILEO/BEIDOU receiver is tracking the current status and signal from the satellites.
When a GPS/GLONASS/GALILEO/BEIDOU receiver is moved from covered area to outdoors and vice versa, the receiver is instantly tracking the location instead of time consuming acquisition.
Key Features
- Easy to chain when using multiple repeaters
- Simple cabling - quick installation
- Automatic gain limitation
- Oscillation prevention with indicator
- Maximal coverage for CE approved repeater
- Sustaining GPS L1/L2/GLONASS/GALILEO/ BEIDOU fix when moving from indoors to outdoors/li>
- Full product family with repeaters, amplifiers and splitters
- All signals in one box
Datasheet
Technical information
- Frequency: GPS L1 (1.57542 GHz), GPS L2 (1227.60 MHz), GALILEO E1 (1575.42 MHz), GLONASS G1 (1602 MHz), BEIDOU B1 (1.5611 GHz)
- Size: 244*165*64 mm
- Weight: 710 g
- Overal Gain:: >40 dB
- Adjustable Gain GPS L1/GLONASS G1/GALILEO E1: 0-40 dB
- Adjustable Gain GPS L2: 0-40 dB
- Impedance: 50Ω
- Input connector: TNC-Female
- Operating temperature: - 40 - +75 °C
- Power supply: +12VDC / 1600mA (sold separately)
- Indoor coverage: upto 50 meters
- Antenna power output: + 5 VDC, 100 mA
- TX Antenna gain: max. +4dBd, RHCP polarisized