Roger™ GNSS Line Amplifier is used to allow longer cable runs for GNSS Repeaters.
It has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO frequency bands and it includes a filter to remove unwanted signals that may have entered the cable at some point.
Amplifier is powered through the output signal cable by the Roger™ GNSS Repeater and also passes on DC power for the GPS receiving antenna or an another Roger™ GNSS equipment.
₹57,375.00
Roger™ GNSS Line Amplifier is used to allow longer cable runs for GNSS Repeaters. It has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO frequency bands and it includes a filter to remove unwanted signals that may have entered the cable at some point.
Technical information:
- Size: 220*148*39mm
- Weight: 135 g
- Operating Temperature: -40 – +75°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: +16dB
Download Datasheet
Related products
-
₹128,830.00
GLONASS L1 repeater with 40 meter cable
A single ROGER GNSS Repeater Package is enough to provide a GPS L1 and GLONASS G1 indoor coverage area of about 1000 square meters and a distance up to 50 meters from the repeater center. Mount the external antenna on the roof of the building and connect the cable supplied with the kit to the antenna and other end to the repeater installed indoors.
[caption id="attachment_797" align="alignnone" width="300"] roger-gps-galileo-glonass-repeater-gnss-l1g1ga-ip51[/caption]Basic Package includes:
- GNSS-L1G1 Repeater,
- Antenna, Antenna mount
- 40 Meter cable
- Power Supply
Product code :GNSS-L1G1-BP40-EU/UK/US
Download Data Sheet
-
₹57,375.00
Roger™ GNSS Line Amplifier is used to allow longer cable runs for GNSS Repeaters.
It has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO frequency bands and it includes a filter to remove unwanted signals that may have entered the cable at some point.Basic Package includes:
- 1 GNSS Amplifier
Product code : GNSS-A
-
₹66,150.00
With the ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and two repeater outputs.
Technical information:
- Size: 22*148*39mm
- Weight: 385 g
- Operating Temperature: -40 – +75°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: 2 x -4 dB