With the ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs. DC power is passed from the chaining output to the input connector for line amplifier and GNSS receiving antenna.
ROGER™ GNSS Splitter is a one to five signal splitter with an output of -4 dB (1 port) and -12 dB (4 ports) that can transmit signal to up to five separate GNSS repeater units. The splitter is easy to use and permits a wide range of system configurations.
₹60,615.00
The ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs.
Technical information:
- Size: 110*143*28mm
- Weight: 135 g
- Operating Temperature: -25 – +55°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: +16dB
Download Datasheet
Related products
-
₹57,375.00
Roger™ GNSS Line Amplifier is used to allow longer cable runs for GNSS Repeaters. It has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO frequency bands and it includes a filter to remove unwanted signals that may have entered the cable at some point.
Technical information:
- Size: 220*148*39mm
- Weight: 135 g
- Operating Temperature: -40 – +75°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: +16dB
Download Datasheet
-
₹3,474.00
GNSS-ESM, Mounting Accessories
GNSS-ESM (Ext Spacer and Mount for Bullet III)
for
GNSS-TRIMB-L1L2-BULLET-ANT
GNSS-TRIMB-BULLET-ANT
GNSS-TRIMB-BULLET360-ANT -
₹73,575.00
With the ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs.