The ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and two repeater outputs. DC power is passed from the chaining output to the input connector for line amplifier and to GNSS receiving antenna.
ROGER™ GNSS Splitter is a one to two signal splitter with an output of -4 dB (2 ports) that can transmit signal to up to two separate GNSS repeater units. The splitter is easy to use and permits a wide range of system configurations.
₹54,675.00
The ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and two repeater outputs.
Technical information:
- Size: 110*143*28mm
- Weight: 185 g
- Operating Temperature: -25 – +55°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: 2 x -4 dB
Product Code: GNSS- S2
Download Datasheet
Related products
-
₹74,250.00
GNSS-TW-3742-ANT, GPS L1, Glonass G1, Galileo E1, BeiDou B1 and SBAS antenna
Key features:
• GPS L1, GLONASS G1, Galileo E1, BeiDou B1 and SBAS
(WAAS, EGNOS, QZSS & MSAS)
• High Gain 40dB
• High rejection SAW filter
• Excellent signal to noise ratio
• Temperature range -40°C to +85°C
• IP67
• Weight 150 g
• Great multipath rejection and great signal to noise ratio -
₹299,375.00
ROGER™ GNSS Amplifier & Splitter is a combined signal splitter and line amplifier that can transmit amplified signal to up to three separate repeater units. Amplifier has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO frequency bands and it includes a filter to remove unwanted signals that may have entered the cable at some point.
Basic Package includes:
- GPS L1 Repeater,
- GPS Splitter
- GPS Amplifier,
Product code :GPSR-SAP-EU/UK/US
-
₹134,990.00
GNSS-L1G1GA, GNSS repeater
ROGER GALILEO/GPS/GLONASS repeater operates by receiving satellite signals with an antenna located outside the building and re-radiating the signals to the indoor area or covered space.
Use of re-radiated signals indoors means that GALILEO/GPS/GLONASS receiver is tracking the current status and signal from the satellites.Basic Package includes:
- GNSS-L1G1GA Repeater,
- Antenna, Antenna mount
- 20 Meter cable
- Power Supply
Product code :GNSS-L1G1GA-BP-EU/UK/US
Download datasheet