GPS Fiber Transport
The GPS Fiber Transport Link by Optical Zonu provides a simple, cost-effective and reliable RF
connection between the GPS antenna and receivers in those instances where coaxial cable is impractical.
It supports to upto a 8-way optical split. With upto 16 RF outputs per channel, this permits extremely
flexible and cost-effective GPS distribution.
Datasheet
Features and Benefits :
- Supports L1 โ L5 Frequencies, GLONASS, GALILEO
- Compact, Rugged IP-67 Antenna Unit
- 1 or 2 GPS Channels โ 8 or 16 RF Outputs
- Auto-Switchover Redundancy Option
- Point-to-Point or Distributed GPS for C-RAN Hubs & Base Station Hotels
- Simple, Clear Alarming Integrates Easily Into Any NMS
- Wireless Infrastructure Synchronization
- Data Network Timing
- Public Utilities
Datasheet
Technical information
- Frequency: 1.1 โ 1.8 GHz
- Noise Figure: 18dB
- Input IP3: +8 dBm
- Link Gain(Typical): 28 dB: 8 RF Outputs/Channel, 24 dB: 16 RF Outputs/Channel
- Group Delay: <1 ns Components + 4.9 ns/m fiber length
- Fiber: Single Mode (Multimode can also be supported โ contact factory)
- Antenna Power: N connector Center Pin: +5 VDC, 50mA
- Power: T Box -36 to -48 VDC; +12 VDC (Option: available with seperate AC adaptor) ; Receiver -36 to -70 VDC; Option: 100-240 VAC, 50-60 Hz, Redundant
- Current: T Box -48 VDC , 80mA(1 GPS Antenna); Receiver -48VDC , 240mA (1 Channel), 333mA (2 Channels); T Box +12 VDC , 240 mA (1 GPS Antenna), 480mA (2 GPS Antennas); Receiver 115VAC 75mA(1 channel) 105 mA(2Channels)
- Operating Temperature: T Box - -20 to +50 ยบC: Tx ; Receiver - 0 to +40 ยบC: Rx
- Dimensions: T Box 9.25โ W x 6โ H x 3โ D ; Receiver 19" W x 1.75" H x 15" D
- Connectors: RF - N (F): T Box SMA(F): Receiver ; Optical - Senko IP-SC/APC (T Box, 1 fiber), Senko IPO-LC/APC dual, (T Box, 2 fiber), SC/APC (Receiver); DC - 2.1mm Sealed Power Lock(T Box), 2 Position 5.08mm Pluggable (Receiver); AC - Receiver Only: IEC60939 Socket
- LED's (T-Box-Fiber Optic Tx): 1 Channel - GREEN :OK; YELLOW: Antenna Fail; RED: Tx Fail; OFF : Power Supply Fail 2 Channels - LED Cycles through 3 states: 1st: OFF , 2nd : Channel 1 status , 3rd: Channel 2 Status