With the ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs. DC power is passed from the chaining output to the input connector for line amplifier and GNSS receiving antenna.
ROGER™ GNSS Splitter is a one to five signal splitter with an output of -4 dB (1 port) and -12 dB (4 ports) that can transmit signal to up to five separate GNSS repeater units. The splitter is easy to use and permits a wide range of system configurations.
₹60,615.00
The ROGER™ GNSS Signal Splitter, is a signal splitter that is used to distribute GNSS signals to several Repeaters. Splitter works with GPS L1, GPS L2/GLONASS/GALILEO frequency bands. It has one chaining output and four repeater outputs.
Technical information:
- Size: 110*143*28mm
- Weight: 135 g
- Operating Temperature: -25 – +55°C
- Connectors: TNC female input TNC female output
- Frequency range: 1200-1700 MHz
- Noise figure: <5 dB
- Impedance: 50Ω
- Gain: +16dB
Download Datasheet
Related products
-
₹128,830.00
GLONASS L1 repeater with 40 meter cable
A single ROGER GNSS Repeater Package is enough to provide a GPS L1 and GLONASS G1 indoor coverage area of about 1000 square meters and a distance up to 50 meters from the repeater center. Mount the external antenna on the roof of the building and connect the cable supplied with the kit to the antenna and other end to the repeater installed indoors.
[caption id="attachment_797" align="alignnone" width="300"] roger-gps-galileo-glonass-repeater-gnss-l1g1ga-ip51[/caption]Basic Package includes:
- GNSS-L1G1 Repeater,
- Antenna, Antenna mount
- 40 Meter cable
- Power Supply
Product code :GNSS-L1G1-BP40-EU/UK/US
Download Data Sheet
-
₹51,300.00
GNSS-TW-3872-ANT, GPS L1/L2, Glonass G1/G2, Galileo E1 + BeiDou B1 antenna
Key features:
GPS L1/L2, GLONASS G1/G2 + BeiDou B1 + Galileo E1
• Gain 35dB, 32 dB min
• Temperature range -40°C to +85°C
• Weight 185 g
• Great multipath rejection and great signal to noise ratio -
₹3,474.00
GNSS-ESM, Mounting Accessories
GNSS-ESM (Ext Spacer and Mount for Bullet III)
for
GNSS-TRIMB-L1L2-BULLET-ANT
GNSS-TRIMB-BULLET-ANT
GNSS-TRIMB-BULLET360-ANT